Style
Replace OEM
Size
Driver Side Brake Cable
J10-26341-00J17-26341-01J56-F6341-00
38-3/8" length
Passenger Side Brake Cable
J17-26351-01J56-F6351-00
48-1/2" length
?
Fit?for Yamaha G1? Gas/Electric? G2/G9? Electric 1978-1989
Meet manufacturer's original equipment specifications
Smooth operation and performance,?improve your car's braking
Easy to install, direct replacement
Material: PE & 304 stainless steel
Cables tend to wear, fray and brake over time and it requires to be replaced?to make your cart continually running properly
Please make sure this oem number correct before you buy to avoid problems
C Clip (Fits OEM: 272-000-135 ) Material: Stainless Steel
Support Ring (Fits OEM: 272-000-064 ) Material: Stainless Steel
Carbon Ring (Fits OEM: 272-000-042 / 272-000-777 ) Material: Carbon
O-Ring (Fits OEM: 293-300-032) Material: Rubber
Rubber Sleeve (Fits OEM: 272-000-041 / 272-000-184 / 272-000-167 )
Meets or exceeds original equipment specifications
Easy installation, direct replacement
Combination kit 1?includes 1 x C-clip drive shaft + 1 x support ring + 1 x carbon ring + 2 x o-ring
Combination Kit 2 includes 1 x C?clip drive shaft + 1 x support ring + 1 x carbon ring + 2 x o-ring + 1 x?shaft boot
Fit for
SeaDoo
SP
1996-1997
SPI
1996
GS
1997-2001
GTI
1996-2005
GTI LE
2002-2004
GTI LE RFI
2003-2005
GTI RFI
2004-2005
GTS
1996-2001
3D RFI / 3D DI
2005-2007
GSX LTD / GSX RFI
1997-2000
GTX RFI
1998-2002
GTX LTD
1998-1999
GTX DI
2000-2003
GTX
1996-2002
SPX
1996-1999
XP / XP LTD / XP DI
1996-2004
LRV / LRV DI
2000-2002
RX / RX DI
2000-2003
RX-X
2001
Kit1
Drive Clutch Fits OEM#: JN6-G6201-03 JN6-G6201-04
Secondary Driven Clutch Fits OEM#: CP-0105 6893
Clutch Drive Belt Fits OEM#: J38-46241-00, J55-G6241-00
Belt Size:1-1/8"W x 39-3/4"outer diameter
Kit2
Drive Clutch wiil Fits OEM#: JN6-G6201-03 JN6-G6201-04
Secondary Driven Clutch wiil Fits OEM#: JN6-G6270-00,JN6-G6271-02; J55-G6270-01,JN6-G6271-02; J55-G6270-01
Clutch Drive Belt will fit OEM#: J38-46241-00, J55-G6241-00
Belt Size: Measures approximately 1-1/8"W x 39-3/4"OD
Â
Drive clucth made of high quality durable Aluminum material, wear-resistant and has good heat dissipation, much light weight than original metal material, highly improve performance, can reduce engine load and gain more power.
This golf cart drive clutch assy helps your cart run more efficiently. It?meets or exceeds the OEM quality and specifications
This cart driven clutch is completed with weights and spring
Bolt on replacement & easy installlation
Fit for
Yamaha
G2
1985 - 2006
G8
1985 - 2006
G9
1985 - 2006
G11
1985 - 2006
G14
1985 - 2006
G16
1985 - 2006
G20
1985 - 2006
G21
1985 - 2006
G22
1985 - 2006
Size: 1-1/8"Width x 48" Outer Diameter
Replaces OEM: 75691-G01
Color: Black, Material: Aramid Fiber
Belts can dry rot and tear over time and require replacing to ensure your golf carts performance.
A worn belt will slip and your cart will not be able to run properly until it is replaced. This is a high quality aftermarket part made to meet or exceed OEM specifications.
Only can be shipped to US now!
Fitment: Can-am Outlander 650
Arctic Cat Alterra 700
Yamaha Kodiak 700
Polaris Scrambler 850
Honda Foreman 500
Material: High-quality rubber compounds. This material makes the tires strong and durable, able to withstand wear and ensuring long-lasting performance.
The unique V-shaped pattern design aims to reduce road vibrations and enhance overall riding comfort.
These tires are suitable for all terrains, performing excellently in various environments.
The 6-ply construction rating means enhanced durability and the ability to carry additional loads without compromising overall performance.
Condition: 100% Brand new, never mounted.
Tire Size 26x9-12:
Pattern
KNIGHT
Tread Depth
20
Max Load
410 LBS
Load Index
49
Ply Rating
6
Speed Rating
F
PSI
7
Tire Size 26x11-12:
Pattern
KNIGHT
Tread Depth
20
Max Load
480 LBS
Load Index
55
Ply Rating
6
Speed Rating
F
PSI
7
FitmentSur-ron Light Bee X;Talaria Sting;Segway X160 & X260;79 Bike Falcon M;E Ride Pro-SS.
Tips: Not compatible with Talaria XXX / MX3 MX4!
Made from Zl111 cast aluminum.
Condition: Brand new, never installed.
Electric Brake Cut's - Plug n Play.
Easy to install.
Includes lever pump assembly only (Does not include caliper, fluid line etc.)
Fit for:Talaria Sting ( Only fit with RST Fork )
Rear wheel axle can fit for Talaria Sting MX3 / Talaria Sting R MX4.
Made from TC4 titanium alloy with surface burnt blue.
Compared with aluminum alloys, titanium alloys are stronger and lighter.
Esay to install,direct replacement.
Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.
Fit for EZGO TXT / RXV 2010-2023.
Replaces OEM Number: 618684,644299,672686.
Made of high quality durable Aluminum material, wear-resistant and has good heat dissipation.
Light weight than stock clutch.
All the parts already good tested before, quality guaranteed.
Easy to install, direct replacement.
This OEM replacement part has been developed to meet or even exceed the manufacturer's original equipment.It helps your cart run more efficiently.
Please make sure the OEM number 100% correct before you buy.
Fit for: Kawasaki Vulcan 900 900S EN900 VN900 S900 2006-2022; Kawasaki Vulcan 900 VN900B Classic 2006-2022; Kawasaki Vulcan 900 VN900D Classic LT 2006-2022; Kawasaki Vulcan 900 VN900C Custom 2007-2022.
Includes: 2pcs exhaust pipes with silencer.
Made from 304 grade stainless steel with surface polishing treatment, anti-corrosion and durable.
Extend the life of the exhaust muffler system.
Good performance in reducing the exhaust temperature. Make the exhaust smoother, improve the power, and provide you with a good driving experience.
Stylish design perfect to decorate your motorcycle.
Easy to install, direct bolt on replacement.
Fit for Harley Davidson Sportster 883 1200 2004-2013;
Material: 6061 T6 aluminum. Aluminum material is lighter than other material.
CNC billet and anodized. Color anodizing surface treatment helps improve the corrosion resistance and gives a badass custom look.
Easy to install.
Fit for Harley Davidson Sportster 883 & 1200 2004-2020.
Kits include:Kit 1: shifter lever + brake lever + 2pcs peg pedals.Kit 2: shifter lever + 1pc peg pedal.Kit 3: brake lever + 1pc peg pedal.
Material: 6061 T6 aluminum. Aluminum material is lighter than other material.
CNC billet and anodized. Color anodizing surface treatment helps improve the corrosion resistance and gives a badass custom look.
Universal brake shift anti-skid rivet peg pedal matches 5/16-24-3/4 inch screws and washers.
The peg pedal can be matched with our brake lever and gearshift lever, or it can be matched with customer original levers.
The pedal can rotate 360 degrees, making this brake pedal perfect for whatever riding style you prefer.
The comfortable serrated surface area of the pedal gives you a great grip while braking.
Pegs have pitch adjustment hardware that allows you to change the angle of the shifter pegs to the riding position preferred by the rider.
Various colors available.
Easy to install.
If you have installed crash bar, we are unable to ensure the fitment.
These forward controls move your feet 12 inches forward.
CNC Aluminum T6061 and Anodized black and Polishing silver.
Aftermarket 100% Brand New Complete assemblies for both brake and shifter sides.
Color:black,silver for choose.
Kit includes pegs,shifter peg,linkages and mounting hardware.
Mounts easily to front mounts.You do not need to purchase anything else,just bolt them on.
NOTE: Style2 is a upgraded version with anti-slip knurled foot pedal.
Fit for
MODEL
SUBMODEL
YEAR
Sportster
1200 Custom (XL1200C)
2004-2013
Sportster
1200 Roadster (XL1200R)
2004-2007
Sportster
1200 Low (XL1200L)
2006-2011
Sportster
1200 Nightster (XL1200N)
2007-2012
Sportster
1200 Forty-Eight (XL1200X)
2010-2013
Sportster
883 (XL883)
2004-2008
Sportster
883 Custom (XL883C)
2004-2009
Sportster
883 Low (XL883L)
2005-2010
Sportster
883R (XL883R)
2005-2007
Sportster
883 Iron (XL883N)
2009-2013
Sportster
883 Superlow (XL883L)
2011-2013
(for 4x2) (fixed sheave od 181mm) (order AM140985 18 mph clutch and also order m141673 brake spacer).Gator and Trail Gator 4X2.1200A Bunker.
Repalce OEM Number: AM141005, AM140985, AM128794.
Made of high quality aluminum alloy, sturdy and durable in use.
Meet the manufacturer's original equipment specifications.
Smooth and responsive performance.
Easy to install, direct replacement.
Includes 1 set primary drive clutch.
Fit for: Honda CR 125 / 250 2002-2007Honda CRF 250R 2004-2013Honda CRF 450R 2002-2012
21"×1.6" front and 18"×2.15", 19"×2.15" rear wheel rims are made from 7075 T6 alloy.
17"×3.5" front and 17"×4.25" rear wheel rims are made by 7116 T6 alloy.
7000 series aluminum rims ensure good strength & lightness. Perfect rim for supercross jump.
Hubs are made from CNC machined forged 6061 T6 aluminum with excellent tensile strength, which prevents stretching.
Hubs with 36 hole construction offering superior hub strength over most brands 32 holes.
65Mn / stainles steel spokes & nipples. Most wheels were assembled with 65 Mn spokes & nipples, only 17'' wheels were assembled with stainless steel spokes & nipples.
Each wheel set have been tested, guaranteeing the best in quality and performance.
Professional installation recommended.
Wheels come complete with bearings, seals and spacers, ready to fit straight onto your bike
Various anodized colors & sizes available. If the color you want do not be listed, please contact us.
Kit 1 Fits OEM#: CP-0105 6893.
Kit 2 Fits OEM#:JN6-G6270-00, JN6-G6271-02, J55-G6270-01, JN6-G6271-02, J55-G6270-01.
Bolt on replacement & Easy installation.
Kit 1 includes fixed and sliding sheaves, spring, spring seat, ramp shoes, wooden key and spacer, plastic washer.
Kit 2 includes fixed and sliding sheaves, spring, spring seat, ramp shoes, wooden key and spacer.
It is an aftermarket drive clutch to meet or even exceed original equipment manufacturer specifications with excellent performance.
Professional installation is highly recommended.
Measures: 27-1/2" length
Replaces OEM : 101832401, 102437901
Fit?for Club Car FE290 1997-2003
Smooth operation and performance
Easy to install, direct replacement
Material: PE & 304 stainless steel
Cables tend to wear, fray and brake over time and it requires to be replaced?to make your cart continually running properly
Plase confirm the OEM number carefully before your purchase
Fit for Club Car DS 4 Cycle 1997-2015
Driven clutch will fits OEM: 101834001
Driver clutch will fits OEM: 101833902(1018339-02), 101832902(1018329-02)
Belt replaces OEM: 1014081, 1017188,1016203
Provide durable and good performance, wear resistance
Clutch material: aluminum alloy
Belt material: aramid fibre
Old belts will dry rot and tear over time, slipping. To ensure the performance of your golf cart, you need to replace your belts regularly
This golf cart drive clutch assy?helps your cart run more efficiently. It?meets or exceeds the OEM quality and specifications
Fits for Harley-Davidson most models.
Includes 5pcs front disc bolts;Â 5pcs rear disc bolts.
Material: 10.9 grade carbon steel.Surface finish: electroplated.
Size: 5/16"-18*3/4" (Front); 3/8"-16*1" (Rear).
Note:The outer diameter of button head is a little smaller than the original bolts. When they are installed on rotors with Counter Bore Hole, they will not fill the entire hole like the original boltsbut it can still work perfectly!!!
Front Rotor Bolts Fit for:Electra Glide All CVO/Ultra Classic/Police FLHTP/Classic/Ultra Limited 1984-2013;Â Fatboy All models 1990-2015; Fatboy Lo All models 2010-2016; Heritage Softail 1986-2015; Heritage Springer 1997-2003; Road Glide 1987-2013; Road King 1997-2013; Softail 2005-2016; Softail Springer 2005-2007; Street Glide 2006-2016; Tour Glide 1990-1996.
Rear Rotor Bolts Fit for:Dyna all models(Wide Glide,Super Glide,Lower Glide..etc) 1997-2017; Electra Glide all models 1994-2020; Fatboy All models 1990-2017; Fatboy Lo All models 2010-2016; Forty Eight 2010-2020; Heritage Softail 1986-2017; Heritage Springer 1997-2003; Iron 883 2009-2020; Iron 1200 2018-2020; Night Train 1999-2008; Road Glide 1998-2020; Road King 1997-2020; Roadster 2016-2020; Seventy Two 2012-2016; Softail 1997-2017; Softail Springer 1997-2007; Sportster 1200 1997-2019; Sportster 883 1999-2019; Street Glide 2006-2020; Tri Glide 2009-2020; Ultra Limited/Ultra Limited Low 2016-2020.
Fit for:Harley FLDE Deluxe 2018-2023; Harley FLFBS Fat Boy 114 2018-2023; Harley FXBB Street Bob 2018-2023.
Stainless steel 420 (2cr13) material for excellent brake performance and stopping power.
Heat-treated to ensure brake area not warped.
Drilled for optimum heat dissipation.
The slotting on the brake surface ensure the rapid dispersion of water and dirt, and also reduce the weight and increase the aesthetics under the premise of maintaining the strength.
Easy to Install. Direct replacement, no modifaction needed.
Floating Front / New Design has a new pattern.
Front Disc Rotor:Outside Diameter: 11.8" (300mm)Inside Diameter: 2.2"(56.5mm)Thickness: 5mmNo of Holes: 5Hole Size: 8.5mmHole Spacing: 82.5mm
Rear Disc Rotor:Outside Diameter: 11.5" (292mm)Inside Diameter: 2.2"(56.5mm)Thickness: 5.8mmNo of Holes: 5Hole Size: 0.4" (10.5mm)Hole Spacing: 82.5mm
FitmentSegway X160 & X260Sur-ron Light Bee X79 Bike Falcon ME Ride Pro-SS
Made of 6061 T6 aluminum.
Surface Treatment: Anodized
Color: Black, Blue, Gold, Orange, Purple, Red, Silver
Plug and play axle stuntpegs.
Footpegs can be removed or they can be "locked" upward.
Replace the original chain adjuster and add a footrest to stand on.
Strongly-built and heavy weight-bearing.
Durable and stylish, cylinder shape carved with non-slipping grooves, safe and durable.
Condition: 100% brand new, never mounted.
Fit for: Yamaha Virago 750 XV 750; Yamaha Virago 1100 XV 1100; Yamaha Virago 1100 XV 1100S Special.
Includes: 2pcs exhaust pipes with silencer.
Only can be shipped to UK now!
Made from 304 grade stainless steel with surface polishing treatment, anti-corrosion and durable.
Extend the life of the exhaust muffler system.
Good performance in reducing the exhaust temperature. Make the exhaust smoother, improve the power, and provide you with a good driving experience.
Stylish design perfect to decorate your motorcycle.
Easy to install, direct bolt on replacement.
Fit for: Surron Light Bee X;79 Bike Falcon M;Segway X160 X260.
Direct replacement for the cost cutting plastic stock plate that comes from the factory.
6061 T6 aluminum & CNC machined.
Anodized surface, available in different colors.
Includes: 1pc ignition mount plate.
