Fit for:Sur-Ron Light Bee X / S,79 Bikes Falcon M;E Ride Pro-SS 2.0 (not fit for E Ride Pro-SS 3.0);Segway X160 X260.
Front wheel sizes21"*1.6" with 36 holes19"*1.4" with 36 holes19"*1.6" with 36 holes
Rear wheel sizes16"*1.85" with 36 holes18"*2.15" with 36 holes19"*1.6" with 36 holes
Wheel rims are made from 7116 T7 alloy for good strength & durability.
6061 T6 aluminum and CNC machined hub for precision fit, increased strength & maximum weight saving. Hubs are anodized in various colors.
36 hole wheel construction offering superior strength over most brands 32 holes.
Stainless steel spokes & nipples.
Wheels can fit original bike sprocket and brake rotors perfectly.
Each wheel set have been tested, guaranteeing the best in quality and performance.
Professional installation recommended.
Various colors & sizes available.
PS:Restricted to use only 90 width rear wheels tires.
Fitment:Sur-ron Light Bee XTalaria XXXSegway X160 / X26079 Bike Falcon ME Ride Pro SS 2.0 / Pro SS 3.0
Material: Aluminum+ Plastic
Brake Caliper Process: Casting.
Condition: 100% Brand New Product, Never Mounted.
The caliper can be used both front and rear.
The caliper has functions such as slowing down the moving wheel, stopping and maintaining the stopped state.
Brake power-off function cannot be used.
It is easy to install without instructions. Original replacement.
Notice: The brake lever kit includes lever pump assembly and fluid line.(Does not include caliper.)
Fit for:Talaria Sting MX3 / R MX4 / XXXSur-ron Light Bee XSegway X160 X26079 Bike Falcon ME Ride Pro SS 2.0 / Pro SS 3.0
Material: Aluminum Alloy
Brake Caliper Process: Casting
Condition: A brand-new, unused product.
Four piston open hydraulic system is more wear-resistant and has better brake regulation.
The integrated oil cylinder design, strong sealing, reduced maintenance, lightweight design, simple appearance.
The disc hydraulic pressure brake kit is compatible with 160/180/203/220mm discs. Brake thickness is about 2.3mm.
This product is easy to install.
Notice: Brake power-off function cannot be used on Talaria XXX / Segway X160 X260 / Sur-ron Light Bee X / 79-Bikes / E Ride Pro-SS.
Fitment:For Sur-ron Light Bee XFor 79 Bike Falcon MFor Segway X160 & X260
100% Brand New, Never Mounted.
Material: Silicone.
Easy Installation with 3M, direct replacement.
The product is squishy enough to be gentle on your knees.
The Knee Pad adds just that little extra thickness to the upper frame allowing you to squeeze the bike with your thighs and knees.
FitmentSur-ron Light Bee X;79 Bike Falcon M;Segway X160 & X260.
Lowering the seat 15mm,30mm or 40mm,moves the seat back 30mm.
Made of 6061 aluminum alloy with surface anodized.
Color: Black, Blue, Gold, Purple, Red, Silver.
A lowered seat appeals to a broader range of riders,including kids and shorter riders.
Easy to install without instruction.
Condition: 100% brand new.
Fit forSur-ron Light Bee X;Segway X160 & X260.
Made from 7075 T6 aluminum for stronger and long life.
Anodized color: black, blue, purple, silver, not easy fade.
Extended range 100mm.
Perfect way to add a few inches to your factory set-up.
Condition: 100% Brand new, never installed.
FitmentSur-ron Light Bee X 2024 and earlier;Talaria Sting / Talaria Sting MX3 / Talaria Sting R MX4;Segway X160 & X260;Talaria XXX.
Material:Aluminum+ Plastic
Condition: Brand new, never installed.
Easy to install,plug n play.
Includes caliper and fluid line as well.
Fit for:Sur-ron Light Bee XSegway X160 & X26079 Bike Falcon M
Surface Finish: Anodized & CNC Machined, high precision and reliable quality are absolutely ensured.
Material: 6061 T6 Aluminum with high quality
Lift Size: 20mm=0.8in, 40mm=1.6in
Function: Rear suspension link rod
The new bearing oil seal replaces the original sealing gasket, and the integrated design is convenient for disassembly and assembly.
A variety of colors can be selected according to preference.
Local thickening to maximize product strength.
Fit for:Sur-ron Light Bee XTalaria Sting / XXXSegway X160 / X26079 Bike Falcon ME Ride Pro SS 2.0
Condition: High quality product
Size: 15*10*5cm
Easy to connect wires to, big or small.
Easy enough to mount with some creative use of zip ties. Best on/off switch.
Package Include: 1PC Single Phase Circuit Breaker
Fit for : Surron Light Bee X;79 Bike Falcon M;E Ride Pro SS 2.0 / Pro SS 3.0;Segway X160 X260.
This is a BMS bypass kit for the Sur-ron stock battery. This wire provides more power and speed for your Sur-Ron or Segway. This kit will allow you to pull up to 8000 watts of power from your stock battery.
Strip ~1/2" of the wire covering back and set as deep as possible in the butt splice. Crimp in place, and crimp the entire length to ensure good contact with the wire.
There is risk with this bypass and install. Please install carefully.
Material: Galvanized copper wire
Insulated wire, heat shrinkable tube.
Fit for: Surron Light Bee X;79 Bike Falcon M;E Ride Pro SS 2.0 / Pro SS 3.0;Segway X160 X260.
This module is a second generation module, which has greater power improvement and better stability than the first generation.
If the module is not cracked by a third party battery, the current will be limited to 60A, and the speed and torque will not increase. After the communication plug is plugged in, the full power 90A+output can be achieved. With real feedback, the maximum current rises from 76a to 106a, and the maximum power rises from 4900w to 7300w.
For Surron Light bee X special, 60v, 63v, 66 batteries can be used.
Note: This communication plug is not required for the battery of the previous model 2019.
Fit for: Surron Light Bee X; 79 Bike Falcon M;Segway X160 X260.
The design offers maximum traction but still let you slide around on the seat when needed.
Seat top features a pleated ribbed design sections for maximum control and feel in any seated position.
Additional grip materal on side panels provide much-needed traction while stangding and gripping the bike with your knees.
All seams are double-stitched for added durability and water resistance.
Easy to install.
No cutting, sanding or filing required.
Includes: 1pc seat cover ( seat are not included).
Fit for: Surron Light Bee X;79 Bike Falcon M;Segway X260.
Includes: 1pc rear suspension linkage.
Function: rear suspension link rod.
The new bearing oil seal replaces the original sealing gasket, and the integrated design is convenient for disassembly and assembly.
Local thickening to maximize product strength.
6061 T6 aluminum material for long lasting.
Anodized finish in different colors.
Fit for: Surron Light Bee X;79 Bike Falcon M;E Ride Pro SS 2.0 / Pro SS 3.0;Segway X260.
Spring Rate: 550LBS, 600LBS, 650LBS.
Material: 55CrSi
Surface Treatment: baking finish.
Easy to install with professional designs.
Includes: 1pc rear shock absorber spring.
550LBS shock absorber spring:
If standard riding style (no jumps and extraordinary suspension bumps/pressure) - suits well for riders up to 180pounds/80kg.
If extreme riding (jumps, high speed riding over obstacles) - suits well for riders up to 130pounds/60kg.
650LBS shock absorber spring:
If standard riding style (no jumps and extraordinary suspension bumps/pressure) - suits well for riders up to 200pounds/90kg.
If extreme riding (jumps, high speed riding over obstacles) - suits well for riders up to 150pounds/70kg.
Fit for:Sur-ron Light Bee XTalaria Sting / Talaria XXX / Talaria Sting MX3 / Talaria Sting R MX479 Bike Falcon ME Ride Pro-SS 2.0 / E Ride Pro-SVTB Ventus OneSegway X160 / Segway X260Front Fork Suspension also fits for Mountain Bike(MTB), Eletric Bike,DH.
FASTACE AHX12RVP Front Fork Suspension:
The product is made of high-strength and lightweight aluminum, with inner and outer tubes, upper and lower plates, and left and right legs.
The interior is designed with spring and oil pressure damping, which is stable and reliable.
The left tube of the front suspension is designed with a high-strength alloy steel spring, which is lighter and better supports the rider's weight. This design meets the various needs of your daily riding.
Upgraded Front Fork Adjustment Guide1.Automatic Air ReleasePress the red buttons on top of both fork tubes to release any built-up pressure after intense riding, ensuring a smoother feel.2.Rebound Damping (24 Clicks)Location: Right fork top (Black).Adjustment:Clockwise (S): Slows down rebound for increased stability.Counter-clockwise (F): Speeds up rebound for improved comfort.Setup Tip: Start by turning fully clockwise, then adjust counter-clockwise to your preferred setting.3.Spring Preload (32 Clicks)Location: Left fork top (Blue).Adjustment:Clockwise: Increases preload for more support.Counter-clockwise: Decreases preload for a plusher feel.Adjustment Range: 0-10mm. Make adjustments without rider weight on the bike.4.Low-Speed Compression Damping (24 Clicks)Location: Fork bottom.Adjustment:Clockwise: Provides a firmer feel for normal riding conditions.Counter-clockwise: Results in a softer feel.Note: Adjust gently and do not force beyond the limit.5.High-Speed Compression Damping (15 Clicks)Location: Fork bottom.Adjustment:Clockwise: Increases support during hard impacts and reduces bottoming out.Counter-clockwise: Enhances comfort over sharp bumps.Note: For damping adjustments, start by setting it fully firm (clockwise) and gradually soften (counter-clockwise) until you find the ideal balance between comfort and control.
FASTACE BDA69RV Rear Shock Suspension
The product can effectively mitigate the impact, so that you can enjoy the comfort of walking on all slopes.
The rear shock absorption can effectively prevent oxidation and improve strength. It can support your difficult movements safely and without worry.
Note: The AR main piston diameter has been upgraded to 29mm (previously 27mm in the legacy version), and the AC main piston diameter has been increased to 24mm (previously 18mm). Additionally, both rebound and compression damping responsiveness have been enhanced.
All adjustments can be personalized according to rider weight, riding habits and specific road conditions.
Fit for:Surron Light Bee XTalaria Sting MX3 / R MX4Segway X160 & X26079 Bike Falcon ME Ride Pro-SS
Machined from 6061 aluminum.
Aluminum materials is more durable compared with plastic.
Functions: headlight switch.
Anodized for several colors. The product provides you with a variety of choices.
Weighing just 0.22 lb/100g, the product is lightweight yet sturdy, ensuring reliable performance.
No complicated installation required.
Fit for:Sur-ron Light Bee XTalaria StingSegway X160 & X26079 Bike Falcon ME Ride Pro-SS
Functions: headlight switch, horn switch button, and mode selection.
Machined from 6061 aluminum CNC.
Surface Treatment: Anodized. Anodized for several colors. The product provides a great variety of choices for your motorcycle.
Aluminum materials are stronger and more durable than plastics.
The wire is enough for installation without worrying about being too tight.
Plug and Play, no professional installation required.
Fit for:Sur-ron Light Bee XSegway X160 & X26079 Bike Falcon M
Color: Black
Material: Plastic
Size: 19.7*9.8* 5.9 in (50CM*25CM*15CM)
Condition: 100% Brand New Product, Never Mounted.
The seat makes your Electric Bike more comfortable and enhance your riding experience.
All our products are 100% fully tested to ensure top quality.
It is easy to install without instructions. Original replacement.
Fit for:Sur-Ron Light Bee XTalaria StingSegway X260 X16079 Bike Falcon ME Ride Pro-SS
Material: Rubber.
Knobby tread pattern.
Tyre width 70.
Wheel diameter 19".
Maximum inflation pressure: 60 psi.
Tyre can be used on both front and rear off-road & road-legal models.
Condition: 100% Brand New Product, Never Mounted.
The original tires are fragile and have almost no tread. Our tires are made of excellent rubber material, giving the carcass high strength and durability.
The tire pattern design provides better coordination with turning and ground contact areas, ensuring driving safety.
All of our products have been good tested before, quality guaranteed.
Fit for:Sur-ron Light Bee XSur-ron Ultra BeeSur-ron Storm BeeTalaria StingSegway X160 & X26079 Bike Falcon ME Ride Pro SS 2.0 / Pro SS 3.0
Material: 6061-T6 Aluminum.
Surface Treatment: Anodized in various colors.
Condition: 100% Brand New Product, Never Mounted.
Extra children's foot pedals keep your child safe while letting you enjoy the ride together.
The kids pedals are designed to be anti-slip, anti-rust and increase safety.
Easy Installation, including mounting screws.
Fit for:Sur-Ron Light Bee XSegway X26079 Bike Falcon ME Ride Pro SS 2.0 / Pro SS 3.0
IN: 100-240V.
OUT: 60V 12A.
US Standard IN 100-240V.
UK Standard IN 200-240V.
EU Standard IN 200-240V.
Only works with the 60V Battery (do not use with x160 or 48v system).
The original factory charger is 60V/10a, our product upgrade to 60V/12a.
The charger is designed to provide a fast and efficient charge to your battery, allowing you to spend less time waiting for your battery to be charged.
The shell has an integrated structure, and a better glue filling process is used inside, which is better shockproof and anti-aging.
Automatic will shutdown when the battery is full to protect your E-bike.
When the internal temperature during charging exceeds the internal set value, the charging current automatically decreases. If the ambient temperature exceeds 65℃ the charger will shut down for protection. When the temperature recovers, charging will automatically resume.
When the battery is reversed, the internal circuit of the charger is disconnected from the battery, which will not damage the charger.
When there is a short circuit in the output, the internal circuit and electromagnetic circuit of the charger are disconnected. Charging can only be restored by reconnecting the battery after the fault is resolved.
All our products are 100% fully tested to ensure top quality.
Fit for:Sur-ron Light Bee XSegway X160 & X26079 Bike Falcon M
Only can be shipped to US now!
When installing the rear tail frame, the original subframe holes needs to be expanded to 6.3mm.
Note: Side bracket and rear tail frame can be installed together.If you need side bracket, please check here---FOR SUR-RON LIGHT BEE X / SEGWAY X160 & X260 / 79BIKE FALCON M / E RIDE PRO-SS ELECTRIC MOTORCYCLE SIDE SADDLEBAGS & BRACKET
Weight Capacity: 2.5kg / 5.5lb.
Pipe thickness: 2mm.
Material: Steel Q235B.
Bend sheet metal welding parts.
Painting requirements: electrophoresis first and then baking paint.
The product is made from durable material and comes in a smooth gloss black finish.
The luggage rack provides more extra space to carry more items.
Package Includes: 1x Luggage Rack.
Fitment for:Sur-Ron Light Bee XTalaria StingTalaria XXXTalaria Sting MX5 ProSegway X160 X26079 Bike Falcon ME Ride Pro SS 2.0 / Pro SS 3.0.
Surface treatment: Anodized
Material: 6061 T6 Aluminum
Color: Black, Blue, Red
Made of excellent Aluminum material, the bike kid handlebar is firm, sturdy and wear-resistant, providing a stable and impact-resistant grip for children.
Extra children's front Handlebar keeps your child safe while letting you enjoy the ride together.
This product is easy to install.
Fit for:Sur-ron Light Bee XSegway X160 & X26079 Bike Falcon ME Ride Pro SS 2.0 / Pro SS 3.0
Note: Side bracket and rear tail frame can be installed together.If you need rear tail frame luggage rack, please check here---FOR SUR-RON LIGHT BEE X / SEGWAY X160 & X260 / 79BIKE FALCON M ELECTRIC MOTORCYCLE REAR TAIL FRAME
Bracket:
Material: Carbon Steel
Surface Treatment: Electrophoresis
Two screw holes on the bracket shall be tapped with M6 screw taps.
Saddlebags:
Condition: 100% Brand new
Color: Black
Material: 500D PVC waterproof mesh fabric
Capacity: 4L/unit, Total 8L
Size: 300mm * 160(230)mm * 95mm
Saddlebags increase your carrying capacity. Road trips are more feasible with added storage.
The saddlebags with rubber-coated oversized zipper for easy operation of gloves.
