Fit for: Surron Light Bee X
The bearing kit is made from high-quality, durable metal materials, ensuring a longer lifespan and higher strength.
This kit is capable of withstanding heavy loads, vibrations, and impacts without easy damage. Featuring dual rubber seals and high-quality waterproof grease, it effectively blocks dust, mud, and road salt, ensuring the stability and reliability of the bearing kit.
Easy to install. Simply remove the old or damaged head tube bearings, and you can easily install the new ones.
Package: Surron headset fork bearing kit * 1 (as shown in the picture)
Fit for: Sur-ron Light Bee X 2025
Condition: A brand-new, unused product.
Material: Aluminum Alloy
Surface Treatment: Anodized+Casting
Package including caliper and fluid line.
This material ensures long-lasting performance, even in the most demanding off-road conditions.
It is simple for customers to install.
Fit for: Suzuki GSX-R 1000 2000-2004
CNC machined & anodized surface treatment, durable and corrosion resistant. High temperature oxidation, not easy to fade away.
Deeply knurled surface provides a secure, non-slip platform for your boots, boosting confidence and control.
Fully adjustable to suit your riding style, adjustable positions of foot pegs to allow for more comfort and more stable base for your whole body.
Hydraulic Switch Installation Instructions1. To remove, slowly losen the old brake light switch bolt connected to the master cylinder.2. Cut the stock brake light cable and connect the two wires from the new brake light switch to it. It does not matter which wire is+or, it will work either way. The two connectors need to be isolated when installing.3. Firmly tighten the new brake light switch bolt and atached crush washer.4. Make sure to fill brake fluid adequately.5. Inspect by pulling in the lever or pushing down the pedal to make sure that the brake light switch is working Must bleed rear brakes before operating motorcycle.
Fit for: BMW S1000RR 2019-2025BMW M1000RR 2021-2025
Material: 6061-T6 Aluminum.
Condition: A brand-new, unused product.
Anodized finishing to prevent from oxidizing and scratches.
Fully adjustable to suit your riding style, adjustable positions of foot pegs to allow for more comfort and more stable base for your whole body.
Hydraulic Switch Installation Instructions1. To remove, slowly losen the old brake light switch bolt connected to the master cylinder.2. Cut the stock brake light cable and connect the two wires from the new brake light switch to it. It does not matter which wire is+or, it will work either way. The two connectors need to be isolated when installing.3. Firmly tighten the new brake light switch bolt and atached crush washer.4. Make sure to fill brake fluid adequately.5. Inspect by pulling in the lever or pushing down the pedal to make sure that the brake light switch is working Must bleed rear brakes before operating motorcycle.
Fit forTalaria Sting MX5 Pro
Kit 1: Hydraulic Rear Foot Brake+ Dual Caliper Bracket+ CaliperKit 2: Hydraulic Rear Foot Brake
Note: This product does not require additional oil.It can only fit with dual calipers.
Surface: Anodized.
Condition: 100% brand new.
Hydraulic master cylinder activates rear brake (replacing hand operated master cylinder).
Modify the brake to the foot and keep the hand brake. Cater to some motorcyclists who are used to operating.
Made from 6061 T6 aluminum. Stronger and lightweight for a long lifetime.CNC machined. High precision and reliable quality are absolutely ensured.
Fit for:BMW HP4 Oil Cooler 2013-2014BMW HP4 RACE Oil Cooler 2018BMW S1000R Oil Cooler 2014-2019/2021BMW S1000RR Oil Cooler 2011-2019BMW S1000XR Oil Cooler 2015-2020
Core Thickness: 32mm
OEM Number: 1721854499617218545633
Designed as a direct OEM replacement.
Finished by 100% aluminum polished (include Core & Tank) .
This radiator is designed with a core that is expertly welded using advanced techniques in a vacuum brazing furnace.
The radiator is engineered to fit perfectly into your existing setup, adhering strictly to factory specifications. You can expect seamless integration with your BMW’s cooling system, making installation straightforward and hassle-free.
Fit for:Kawasaki KX 450 2024-2025
Core Thickness: 26mm
OEM Number: Left: 39061-0875
Condition: 100% Brand New Product, Never Mounted.
Core of the radiator is welded in vacuum brazing furnace, no epoxy.
Designed to maintain the correct cooling level and prevent overheating.
The entire unit boasts a polished finish that is made entirely of 100% aluminum, which can contributes to its corrosion resistance, ensuring longevity and durability in various environmental conditions.
All radiators are subjected to an aging and endurance test to validate their performance under extreme conditions.
Fit for:Yamaha YZF 250 2024-2025Yamaha YZF 450 2023-2025
Core Thickness: 26mm
OEM Number: Left: BHR-1240A-00-00Right: BHR-12461-00
This radiator is designed with a core that is expertly welded using advanced techniques in a vacuum brazing furnace.
The entire unit boasts a polished finish that is made entirely of 100% aluminum, which can contributes to its corrosion resistance, ensuring longevity and durability in various environmental conditions.
The radiator is engineered to fit perfectly into your existing setup, adhering strictly to factory specifications. You can expect seamless integration with your Yamaha’s cooling system, making installation straightforward and hassle-free.
Fit for: Honda MSX125 / GROM 125 2014-2020
CNC machined & anodized surface treatment, durable and corrosion resistant. High temperature oxidation, not easy to fade away.
Deeply knurled surface provides a secure, non-slip platform for your boots, boosting confidence and control.
Fully adjustable to allow for more comfortable & agressive body position.
Note: After adjusting the footpegs upward and backward, the original hydraulic switches are no longer sufficient and must be replaced with longer ones.
Fit for:Sur-ron Light Bee XTalaria Sting / Talaria XXX / Talaria Sting MX3 / Talaria Sting R MX479 Bike Falcon ME Ride Pro-SSVTB Ventus OneSegway X160 / Segway X260Front Fork Suspension also fits for Mountain Bike(MTB), Eletric Bike,DH.
FASTACE AHX12RVP Front Fork Suspension:
The product is made of high-strength and lightweight aluminum, with inner and outer tubes, upper and lower plates, and left and right legs.
The interior is designed with spring and oil pressure damping, which is stable and reliable.
The left tube of the front suspension is designed with a high-strength alloy steel spring, which is lighter and better supports the rider's weight. This design meets the various needs of your daily riding.
Upgraded Front Fork Adjustment Guide1.Automatic Air ReleasePress the red buttons on top of both fork tubes to release any built-up pressure after intense riding, ensuring a smoother feel.2.Rebound Damping (24 Clicks)Location: Right fork top (Black).Adjustment:Clockwise (S): Slows down rebound for increased stability.Counter-clockwise (F): Speeds up rebound for improved comfort.Setup Tip: Start by turning fully clockwise, then adjust counter-clockwise to your preferred setting.3.Spring Preload (32 Clicks)Location: Left fork top (Blue).Adjustment:Clockwise: Increases preload for more support.Counter-clockwise: Decreases preload for a plusher feel.Adjustment Range: 0-10mm. Make adjustments without rider weight on the bike.4.Low-Speed Compression Damping (24 Clicks)Location: Fork bottom.Adjustment:Clockwise: Provides a firmer feel for normal riding conditions.Counter-clockwise: Results in a softer feel.Note: Adjust gently and do not force beyond the limit.5.High-Speed Compression Damping (15 Clicks)Location: Fork bottom.Adjustment:Clockwise: Increases support during hard impacts and reduces bottoming out.Counter-clockwise: Enhances comfort over sharp bumps.Note: For damping adjustments, start by setting it fully firm (clockwise) and gradually soften (counter-clockwise) until you find the ideal balance between comfort and control.
FASTACE BDA69RV Rear Shock Suspension
The product can effectively mitigate the impact, so that you can enjoy the comfort of walking on all slopes.
The rear shock absorption can effectively prevent oxidation and improve strength. It can support your difficult movements safely and without worry.
Note: The AR main piston diameter has been upgraded to 29mm (previously 27mm in the legacy version), and the AC main piston diameter has been increased to 24mm (previously 18mm). Additionally, both rebound and compression damping responsiveness have been enhanced.
All adjustments can be personalized according to rider weight, riding habits and specific road conditions.
Fit for: Altis Sigma / Sigma MX
Width: 800mm
Rise: 134mm
Back Sweep: 9 degrees
Up Sweep: 5 degrees
Center Clamp Size: 31.8mm
Available in various colors to match your style.
All handlebars undergo an anodizing process, creating a robust integral coating that protects against corrosion.
The full bead-blast finish ensures durability and provides an anti-slip surface at the clamps. Centring and alignment marks are laser-etched into the handlebars for precise setup.
The tapered tube design features a thicker center and thinner ends, resulting in a strong yet flexible bar.
Fit for: Yamaha YZF-R1 2015-2024
The components are made from high-quality Aluminum 6061 and stainless steel, ensuring durability and strength.
They undergo CNC machining and receive an anodized surface treatment, provides excellent corrosion resistance, making them less prone to fading over time.
Additionally, these components are designed with adjustability in mind to accommodate various riding postures. With multiple screw holes strategically placed, riders can easily change the position of different parts to achieve optimal comfort and performance.
This design feature enhances the overall riding experience by providing reliable and precise control during operation.
Fit for: Yamaha MT-07 2013-2022
Material: Aluminum 6061 & Stainless Steel
CNC machined & anodized surface treatment, durable and corrosion resistant.
Each kit is fully adjustable and each part has multiple mounting positions for mounting and dismounting
The shift and brake pedals have double stainless bearings for smooth movement without wobble.
Note: After adjusting the footpegs upward and backward, the original hydraulic switches are no longer sufficient and must be replaced with longer ones.
Fit for: Altis Sigma / Sigma MX
Material:Aluminum+ Plastic
Condition: Brand new, never installed.
The oil pump adopts the main forging process.
Easy to install, brake lever caliper master cylinder system is already assembled, all you need All you have to do is just bolted on.Easy to install and great stopping power.
Includes caliper and fluid line as well.
Fit for: Altis Sigma / Sigma MX
Material: Sintered Metal
Condition: 100% brand new, never mounted.
Can be used with stainless steel rotors.
The design reduces noise and vibration for smoother stops.
Including: 1 Pair Brake Pads
Fit for Altis Sigma / Sigma MX
Made of 6061 T6 aluminum and CNC machined.
Condition: 100% brand new.
The brake reservoir cap keeps the fluid clean and helps it to keep out the moisture.
The brake reservoir cap is machined by CNC technology, the accuracy of each cutting part can be ensured for easy installation.
Well tested before shipping, high quality guaranteed.
Easy to install without instruction.
Fit for Yamaha YZ 125 / YZ 250 1992-2025.
Front Wheel: 17"*3.5" 36 holes. / 21"*1.6" 36 spokes.Rear Wheel17"*4.25" 36 holes. / 18"*2.15" 36 spokes / 19"*2.15" 36 spokes.
Black rims, black spokes and blue hubs.
7000 series aluminum alloy rim for high performance. Greatly improved strength over OEM rims.
Hubs are made from billet aircraft aluminum alloy 6061 material , T6 standard heated treatment to ensure the material have highest density and highest strength. High performance than cheap casting hubs.
36 hole wheel construction offering superior strength over most brands 32 holes.Wheels come complete with bearings, seals and spacers, ready to fit straight onto your bike.
Most wheels were assembled with 65 Mn spokes & nipples, only 17'' wheels were assembled with stainless steel spokes & nipples.
Fit for: Aprilia RS660 2024
Aluminum alloy A365 standard material for high strength and durability.
Plastic sprayed surface and powder coating to add lots of strength and durability over the painted alternative.
CNC machined and quality tested to ensure the best possible product.
Easy to install. Direct OEM replacements, no need to change.
Good heat dissipation, high strength and fashion designs with exquisite shape.
Professional installation recommended.
The bearings, axle spacer, dust seals, and valve stem are not included.
Fit for: Talaria Sting R MX5 Pro
Surface Finish: Anodized & CNC Machined
Made from 6061 T6 aluminum.
Anodized for several colors.
The kickstand can be adjusted up and down 1.2'' (30mm) to match different wheels. Adjust 10mm at a time.
The side support base is enlarged to increase the contact area with the ground to make the bike park more stable.
Includes: 1pc adjustable kickstand.
Fit for: Talaria Sting MX5 Pro
Surface Finish: Anodized & CNC Machined
Anodized for several colors.
It is designed to protect your thin rear brake rotor from rocks and stumps. This is one of the most crucial upgrades for talaria rider that enjoys woods riding or hard enduro riding.
CNC billet 6061 T6 aluminum to replace the original cast aluminum caliper mount for more strength and longevity.Note: We have two designs, The difference is Design 2 will allow you to mount two calipers, but the Design 1 don't. Please choose according to your needs.
Fit for: Talaria Sting MX5 ProE-Ride Pro 3.0 / E-Ride Pro SRSRPNT Moto (W/ Big brakes)
Material: Sintered Metal
Condition: 100% brand new, never mounted.
Can be used with stainless steel rotors.
The design reduces noise and vibration for smoother stops.
Including: 1 Pair Brake Pads
Fit For: Talaria Sting MX5 Pro
Material: 6061 T6 aluminum.
Added adjustment scale lines.
Screw: stainless steel.
Anodized in different colors.
Function: Turn the adjusting bolt. Move the axle block forward or backward to adjust the sprocket tension.
Includes: 1 Pair (Left+Right).
Fit For: Talaria Sting MX5 Pro
Turn the adjusting bolt. Move the axle block forward or backward to adjust the sprocket tension.
Added L/R left and right marks and adjustment scale lines.
When adjusting the chain, use it with the frame.
Material: 6061 T6 aluminum.
Screw: stainless steel.
Includes: 1 Pair (Left+Right).
Fit for: Yamaha Bolt XVS 950NOTE: KICKSTAND DOES NOT MOVE! Kick stand has it's own bracket and does not move forward. Material: 6061 Aluminium & Stainless Steel.These forward controls move your feet approximately 12.5" forward to adjust your driving position and ensuring maximum control and stability on the road. Package Includes: 1 x Forward Controls Extension Kit. Everything you need to bolt on and go.
