Fit forYamaha YZF-R25 2018-2020Yamaha MT-25 2018-2021Yamaha YZF-R3 2015-2024Yamaha MT-03 2020-2024
Size17"×2.75" Front Cast Wheel17"×4.0" Rear Cast Wheel
Design: Tubeless, Light Weight
Color: Black, Blue
Made of aluminum alloy A365 standard material.
Plastic sprayed surface and powder coating.
Direct replacement of OEM / Stock wheels, no need to change.
The bearings and seals are also included.
CNC machined and quality tested to ensure the best possible product.
Condition: 100% Brand new, never mounted.
Please confirm the models and years carefully before you buy to avoid the wrong.
FitmentFor John Deere 4X4, XUV825i, XUV825I S4, XUV825E, XUV825M, XUV825M S4, XUV835M Gator Utility
Replaces OEM number: AUC14491, AM146794, AM142333
This is an OEM replacement part.
Meet or exceed original equipment specifications.
Please make sure the OEM number 100% correct before you buy.
Easy to install & direct replacement.
Includes 1pc primary drive clutch assy for John Deere.
Comet Industries 860 Series Driven Clutch.
Reference OEM Number: Comet 300707C.
3/4'' Bore with 3/16'' key way, 11 1/4'' Diameter.
Used with 1 3/16'' wide Comet drive belts.
Meet or exceed original equipment specifications.
Easy to install, direct replacement.
Condition: 100% Brand new, never mounted.
Transaxle (driven) clutch for John Deere AMT 622, AMT 600, AMT 626.
Reference OEM Number:AET10637
3/4" Bore Shaft and 11.25" Diameter.
The AMT's were the 5 wheel Gators. If your Gator has 4 or 6 wheels, this clutch will not work for you.
Meet or exceed original equipment specifications.
Easy to install, direct replacement.
Condition: 100% Brand new, never mounted.
Fit for:Yamaha G29 Drive Golf Carts
Shifter box: Iron;CNC bending.
Shifter lever: 6061-T6 aluminum;CNC machining.
Shifts smoother and works better than any shifter available.
If you have a high amp controller installed you need this BEEFED up switch.
Come with the highst quality, all the products are good tested before.
Easy to install, direct bolt on replacement.
Including:1 PC Sport Shifter Assembly
Installation attention points:
You need to remove the shifter knob, top, and outside cover to adjust the throw.
Place the cart in neutral and remove the stock shifter from the cart.
Save the stock screw for installing new sport shifter.
Loosen or remove the bolts holding the stock shifter assembly on the car. Save these bolts for reinstallation. Slide the shifter assembly off the mounting bracket and let hang away from the body.
Using a drill bit, drill the four mounting holes into the body.
Come with 2 types shifter knobs, you can choose knob according to your needs, much convenient and also make shifting so much easier for both adults and kids as well.
Fits OEM#: JW8-G6202-22-00, JW8-G6202-23-00
Brand new secondary driven clutch.
Meet or exceed original quality part, high perfermance and quality.
Bolt on replacement & Easy installation.
A good clutch will help your cart run more efficiently; This is an essential part of your golf cart.
Please make sure the OEM number 100% correct before you buy.
Fit for: Yamaha G29 2012-up
Primary drive clutch fits OEM#: JN6-G6201-03 JN6-G6201-04.
Including: 1 set (all bolts included).
Bolt on replacement & Easy installlation.
A good clutch will help your cart run more efficiently; This is an essential part of your golf cart.
This OEM replacement part has been developed to meet or even exceed the manufacturer's original equipment.
Professional installation is highly recommended.
Fit for Yamaha G1 2-Cycle Gas 1978-1989.
Replace OEM#: J10-46210, J10-46210-00, CP-94Y1, 9038, CP-0005 EC, CP-0005DS EC, 94Y1IMC.
Including: 1 set (all bolts included).
A good clutch will help your cart run more efficiently; This is an essential part of your golf cart.
Bolt on replacement & Easy installlation.
This OEM replacement part has been developed to meet or even exceed the manufacturer's original equipment.
Professional installation is highly recommended.
Only can be shipped to US NOW!
Fit for Yamaha G29 2008-2011.
Replaces OEM Number: JW1-G6201-00-00.
High resistance to wear and tear.
Light weight than stock clutch.
All the parts already good tested before, quality guaranteed.
Bolt on replacement & easy installlation.
This OEM replacement part has been developed to meet or even exceed the manufacturer's original equipment. It helps your cart run more efficiently.
Please make sure the OEM number 100% correct before you buy.
Fits OEM: 101834001
Rust Resistant
Meet the manufacturer's original equipment specifications.
Easy to install, no drawings required
Quantity: 1 Set (all bolts included)
Fit for Club Car DS & Precedent Gas Golf Carts from 1997 & Up
Feature
Brand new,never mounted.
Genuine BRP Sea-Doo half-ring bushing.
This is a factory original equipment item, not aftermarket.
Non-current.
Replaced OEM number:Seadoo?277000055
Inc:This listing is for ONE PAIR (quantity 2 total).
Only can be shipped to US now!
Fits OEM: 6S5-14360-00-00
Material: 6061 Aluminium (The screws are stainless steel)
Made of?6061 aluminum,?CNC machined and anodized in?black & titanium
Stainless steel bolts and washers included
Much stronger than the OEM.
Please check the OEM number & fitment carefully before your purchase
Fit for?Yamaha 1.8L Waverunners FX, FX Cruiser, FZS, and FZR 2008-2010
Yamaha WaveRunner FX FA1800 SHO 2013-2015Yamaha WaveRunner FX FB1800 HO 2012-2015Yamaha WaveRunner FX SVHO 2014-2015Yamaha WaveRunner FX FX1800 SHO 2008-2012Yamaha WaveRunner FX FX1800 HO 2011Yamaha WaveRunner FX FY1800 HO 2009-2011Yamaha WaveRunner FX FX1000 2008Yamaha WaveRunner FX FX1100 HO 2008Yamaha WaveRunner FX Cruiser FA1800A SHO 2013-2015Yamaha WaveRunner FX Cruiser FB1800A HO 2012-2015Yamaha WaveRunner FX Cruiser FB1800 HO 2015Yamaha WaveRunner FX Cruiser SVHO 2014-2015Yamaha WaveRunner FX Cruiser FX1800 SHO 2008-2012Yamaha WaveRunner FX Cruiser FY1800A HO 2009-2012Yamaha WaveRunner FX Cruiser FX1000A 2008Yamaha WaveRunner FX Cruiser FX1100A HO 2008Yamaha WaveRunner FZR GX1800 2009-2015?Yamaha WaveRunner FZS GX1800A 2009-2015
Replace OEM: 277001802
Material: Rubber
Including:?1 * Seadoo start and stop button
Fits many 2008+ 4-TEC models
Easy Installation, replace directly
Condition: 100% Brand New
Color:?Red
Please make sure this OEM number is 100% correct before buying
Fit for
SeaDoo
SP
1992-1997
GTS
1992-2001
GTI ALL MODELS
1996-2005
GTX ALL MODELS
1992-2002
GSI
1997
XP / XP DI / XP LIMITED
1992-2004
SPI
1993-1996
SPX
1993-1999
HX
1995-1997
GSX ALL MODELS
1996-2000
GS
1997-2001
RX / RX DI
2000-2003
LRV / LRV DI
2000-2002
3D
2005-2007
RXP-X
2008
RXT-X
2008
Material:
Shifter box: Iron; CNC bending.
Surface treatment: Spraying black.
Shifter lever: 6061-T6 aluminum; CNC machining.
Surface treatment: Anodized.
Includes 2 different styles handle heads.
Includes all parts as shown in images to complete install in these models only.
Fits: All years Yamaha G14 thru G22 Gas Golf Cart models.
Material: PE & 65 Mn
Measures 57-5/8" long
Includes 1 new transmission shift cable,Guides your cart into forward and reverse.
If your cart is no longer moving in the right direction, you may have an easily repairable shift cable that is broken.
These cables tend to wear, fray and brake over time and require replacing for your cart to continue running properly.
Features
?Allow Removal Of Oil Injection Pumps For Modified Engines
Premixing To?Exact Ratio Elimininates The Disaster Of Injection Pump Failure
CNC-Maachined High Quality Aluminum
1. Allows Removal of Oil Injection Pumps for Modified Engines.2. Premixing to Exact Ratio Eliminates The Disaster of Injection Pump Failure.3. CNC-machined High Quality Aluminum.
Fit For:?
Sea Doo 580 / 650 / 720 1989 - 2004
Features
Allow Removal Of Oil Injection Pumps For Modified Engines
Premixing To?Exact Ratio Elimininates The Disaster Of Injection Pump Failure
CNC-Maachined High Quality Aluminum
Fit for
Year
Make
Model
1992-1995
Polaris
SL 650
1996-1997
Polaris
SL 700
1993-1995
Polaris
SL 750
1996-1997
Polaris
SL 780
1994-1995
Polaris
SLT 750
1996-1997
Polaris
SLT 780
1995-1996
Polaris
SLX 780
Material: PE & 65 Mn
Measures 57-5/8"?long
Includes?1 new transmission shift cable,Guides your cart into forward and reverse.
If your cart is no longer moving in the right direction, you may have an easily repairable shift cable that is broken.
These cables tend to wear, fray and brake over time and require replacing for your cart to continue running properly.
Brand new and fine craft
Material : Aluminum alloy
Craft : Metal bending and welding
Color : Black power coat finish
UV Protected
Universal--any brand of trolling motor foot control will fit in this?pan
Dimensions: as picture shows
Package Dimensions : 53 cm*35 cm*14 cm, 5.2 kg
Manufacturer: Wuxi Rulli Metal Product -- A large-size in house metal product factory, a recognized expert in the manufacture of CNC turned parts in China.
?
Note: Trolling Motor Pan Only (as pictured).Does NOT include hardware (screws), mounting template, or Drain Tube.
Description:
It is brand new and unused.
Made by 6061 T6 aluminum CNC machined for high strength & durability.The surface uses electroplating process to make the product not easy to corrode and more durable.Colour: SilverSize:15.5*15*5
Weight:0.42kg/0.44kg/0.46kg
we have many size like below sheet,please double check your own size before you place an order.
Hole Size 1 3/4"
Hole Size 2"
Hole Size 2 1/4"
Hole Size 2 1/2"
